HP MSR2000 Configuration Manual page 450

514/514
5. Configure a static route to 4.4.4.4/32 through Tunnel-Bundle 0.
[RouterA] ip route-static 4.4.4.4 32 tunnel-bundle 0 preference 1
Verifying the configuration
# Execute the display tunnel-bundle command on Router A to display information about the tunnel
bundle interface and its member interfaces.
[RouterA] display tunnel-bundle
Tunnel-Bundle Name
Bundle State
Bundle Attributes
Bundle Mode
Tunnel Type
Tunnel Destination
Bundle Members :
Member
Tunnel1
Tunnel2
# Execute the display mpls tunnel all command on Router A to display information about the tunnel
bundle for the tunnel bundle interface.
[RouterA] display mpls tunnel all
Destination
4.4.4.4
# Execute the display mpls lsp protocol local verbose command on Router A to display information about
local LSPs for the tunnel bundle interface.
[RouterA] display mpls lsp protocol local verbose
Destination
FEC
Protocol
LSR Type
Service
NHLFE ID
State
Out-Interface: Tun1
BkInterface
# Execute the display mpls protection command on Router A to display MPLS protection group
information.
[RouterA] display mpls protection
Total number of protection-groups: 1
Group Type
0 Tunnel-bundle
1.1.1.1
: Tunnel-Bundle 0
: Up
:
: 1:1
: CR-LSP
: 4.4.4.4
State Weight
Up 1
Up 1
Type Tunnel/NHLFE
CRLSP Tunnel-Bundle0
: 4.4.4.4
: TunBDL0
: TE
: Ingress
: -
: 536870912
: Active
: Tun2
Work-tunnel ID
1
127.0.0.1 Up
Role
Working
Protection
VPN Instance
-
Protect-tunnel ID
2
441
1127ms Tunnel2
State
N