HP MSR2000 Configuration Manual page 219

Step
1. Enter system view.
2. Enter BGP view.
3. Enter BGP-VPN
view.
4. Configure an EBGP peer.
5. Enter BGP-VPN IPv4 unicast
address family view.
6. Enable BGP to exchange
IPv4 unicast routes with the
peer.
7. Allow the local AS number
to appear in the AS_PATH
attribute of routes received
from the peer, and set the
maximum number
repetitions.
8. Redistribute remote
routes advertised by the PE
into BGP.
9. (Optional.) Configure
filtering of advertised
routes.
10. (Optional.) Configure
filtering of received routes.
2. Configure a VPN site:
Step
1. Enter system view.
2. Enter BGP view.
3. Configure the MCE as an
EBGP peer.
4. Enter BGP-VPN IPv4 unicast
address family view.
5. Enable BGP to exchange
IPv4 unicast routes with the
peer.
Command
system-view
bgp as-number
instance
ip vpn-instance vpn-instance-name
peer { group-name | ip-address }
as-number as-number
address-family ipv4 [ unicast ]
peer { group-name | ip-address } enable
peer { group-name | ip-address }
allow-as-loop [ number ]
of
import-route protocol [ { process-id |
site
all-processes } [ allow-direct | med
med-value | route-policy
route-policy-name ] * ]
filter-policy { acl-number | prefix-list
prefix-list-name } export [ protocol
process-id ]
filter-policy { acl-number | prefix-list
prefix-list-name } import
Command
system-view
bgp as-number
peer { group-name | ip-address }
as-number as-number
address-family ipv4 [ unicast ]
peer { group-name | ip-address }
enable
210
Remarks
N/A
N/A
N/A
By default, no BGP peer is
configured.
N/A
By default, BGP does not
exchange IPv4 unicast
routes with any peer.
By default, BGP discards
incoming route updates
that contain the local AS
number.
By default, no routes are
redistributed into BGP.
By default, BGP does not
filter advertised routes.
By default, BGP does not
filter received routes.
Remarks
N/A
N/A
N/A
N/A
By default, BGP does not
exchange IPv4 unicast routes
with any peer.