Siemens SIMATIC S5 Manual page 118

Saving the file It is now time to save the data with COM ET 200 Windows.
1. Save the entire configuration in a program file by selecting
2. Enter a file name and confirm by pressing the "OK" button.
Printing the You can print documents that will show you, for example, which STEP 5
system address is assigned to which DP slave. This entails printing the
documentation
station-oriented address assignments with Documentation
oriented address assignment.
Exporting data to
The last step is to export the COM ET 200 Windows data to memory card.
memory card
1. Insert the memory card in the memory-card slot of the programmer.
2. Click on the master system that you want to export to the memory card.
3. Select File
ET 200 Distributed I/O System
EWA 4NEB 780 6000-02a
File Save as.
If your programmer has only an E(E)PROM slot, you must first insert a
programming adapter (see Appendix F for order numbers).
If you are working on a PC, you must export the data to the memory card
via an external programming unit and the programming adapter (see
Appendix F for order numbers).
Export Memory card and confirm by pressing the "OK"
button.
Result: The data for the master system is exported to the memory card.
You can now insert the memory card in the IM 308-C.
Starting COM ET 200 Windows
Station
7
7-13