Siemens SIMATIC S5 Manual page 220

IP 266
Field Source
Device: Select one of the following with <F7>:
• Module/IP 266
• Programmer/PG
• Disk drive/FD
The next selection is displayed each time you press <F7>.
DB No.: Enter the number of the data block you
want to transfer.
An asterisk (*) in this input field
automatically selects all "traversing
(machining) program" DBs.
"*" is also allowed for transferring
machine data from FD to FD.
Drive: If the DEVICE is a floppy disk or hard
disk, you will be prompted to specify
the drive. Make the appropriate
selection with <F7>.
Filename: If you selected a drive, you must enter
the filename in this field. Select a file
from the list of files on the relevant
drive with <F7>. "Data block missing"
is displayed if no file is available.
Plant code The "Plant code", "Developer" and "Generation date" fields are updated in
Developer accordance with the file selected.
Generation
date
EWA 4NEB 812 6057-02
Fundamentals of COM 266
Destination
The source data block is displayed as
default. You may change this number.
The DB no. of the destination device is
irrelevant.
The drive identifier is taken from the
"PRESETS" form, and cannot be
changed.
The name specified in the "PRESETS"
form is displayed as filename, and
cannot be changed.
6-53