Siemens SIMATIC S5 Manual page 206

IP 266
Function key menu:
<F4> Press this key to start the printout.
The following message is displayed on the error line while printing is
in progress:
FEC
When the printer stops, you will see the message:
FEE
<F8> This key has two functions.
While a printout is being made, you can abort it by pressing this key.
When you do so, "Abort printing (Y/N) ?" is displayed on the error line.
You must either confirm the abort request by entering Y or revoke it by
entering N.
If you press this key when the printer has stopped, you immediately exit
the Print menu.
A machine data printout has the following layout:
Machinedata Source
LINEAR FD
Maximum deceleration
Acceleration fwd
...
...
...
Incremental speed
Siemens AG Printout
Simatic S5 Machinedata
COM 266 - IP 266 LINEAR AXIS
Figure 6-17. Machine Data Printout
EWA 4NEB 812 6057-02
Printing ...
Printed!
DB no. Module
1
: 500 [mm/sec ]
: 200 [mm/sec ]
: 1000 [mm/min]
Meier
Fundamentals of COM 266
Dimensional unit
11 mm
(10...9999)
(10...9999)
(10...9999)
Date 16.11.90
Page 1
6-39