Machining the workpiece
5.10 Editing a program
5.10.4
Renumbering a program
You can modify the block numbering of programs opened in the editor at a later point in time.
Precondition
The program is opened in the editor.
Procedure
Note
• If you only want to renumber a section, before the function call, select the program blocks
whose block numbering you want to edit.
• When you enter a value of "0" for the increment size, then all of the existing block
numbers are deleted from the program and/or from the selected range.
126
1.
Press the ">>" softkey.
A new vertical softkey bar appears.
2.
Press the "Renumber" softkey.
The "Renumbering" window appears.
3.
Enter the values for the first block number and the increment to be used
for numbering.
4.
Press the "OK" softkey.
The program is renumbered.
Operating Manual, 01/2015, 6FC5398-6AP40-5BA2
Universal