Unload/Load/Relocate All Tools - Siemens SINUMERIK 840D sl Operating Manual

10.8.3

Unload/load/relocate all tools

You have the option of unloading all tools in the magazine list, loading them into the
magazine list or relocating them in the magazine list. With one task, the tools are loaded or
unloaded from the list – or relocated in the list.
Requirement
The following requirements must be satisfied so that the "Unload all", "Load all" or "Relocate
all" softkey is displayed and is available:
● Magazine management is set up
● There is no tool in the buffer / in the spindle
Procedure
Multiple load points
For a magazine, if more than one loading point was set-up, using the "Select loading point"
softkey, you have the option of opening a window in which you can assign a loading point to
a magazine.
Universal
Operating Manual, 01/2015, 6FC5398-6AP40-5BA2
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. The magazine list is open.
2. Press the "Unload all" softkey.
- OR -
Press the "Load all" softkey.
- OR -
Press the "Relocate all" softkey.
A prompt is displayed as to whether you really want to unload, load or
relocate all tools.
3. Press the "OK" softkey to continue with the unloading, loading or reloca-
tion of the tools.
The tools are unloaded, loaded or relocated in the magazine in ascend-
ing magazine location number order.
4. Press the "Cancel" softkey if you wish to cancel the unloading operation.
Tool management
10.8 Magazine
241