Siemens SINUMERIK 840D sl Operating Manual page 22

Introduction
2.2 Operator panel fronts
22
<Cursor up>
• Editing box
Moves the cursor into the next upper field.
• Navigation
– Moves the cursor in a table to the next cell upwards.
– Moves the cursor upwards in a menu screen.
<Cursor up> + <CTRL>
• Moves the cursor in a table to the beginning of the table.
• Moves the cursor to the beginning of a window.
<Cursor up> + <SHIFT>
In the program manager and in the program editor, selects a contig-
uous selection of directories and program blocks.
<Cursor down>
• Editing box
Moves the cursor downwards.
• Navigation
– Moves the cursor in a table to the next cell downwards.
– Moves the cursor in a window downwards.
<Cursor down> + <CTRL>
• Navigation
– Moves the cursor in a table to the end of the table.
– Moves the cursor to the end of a window.
• Simulation
Reduces the override.
<Cursor down> + <SHIFT>
In the program manager and in the program editor, selects a contig-
uous selection of directories and program blocks.
<SELECT>
Switches between several specified options in selection lists and in
selection boxes.
Activates checkboxes.
In the program editor and in the program manager, selects a pro-
gram block or a program.
<SELECT> + <CTRL>
When selecting table rows, switches between selected and not se-
lected.
Operating Manual, 01/2015, 6FC5398-6AP40-5BA2
Universal