Siemens SINUMERIK 840D sl Operating Manual page 24

Introduction
2.2 Operator panel fronts
24
<TAB> + <SHIFT>
• In the program editor, indents the cursor by one character.
• In the program manager, moves the cursor to the next entry to
the left.
<TAB> + <CTRL>
• In the program editor, indents the cursor by one character.
• In the program manager, moves the cursor to the next entry to
the right.
<TAB> + <SHIFT> + <CTRL>
• In the program editor, indents the cursor by one character.
• In the program manager, moves the cursor to the next entry to
the left.
<CTRL> + <A>
In the actual window, selects all entries (only in the program editor
and program manager).
<CTRL> + <C>
Copies the selected content.
<CTRL> + <E>
Calls the "Ctrl Energy" function.
<CTRL> + <F>
Opens the search dialog in the machine data and setting data lists,
when loading and saving in the MDI editor as well as in the program
manager and in the system data.
<CTRL> + <G>
• Switches in the program editor for ShopMill or ShopTurn
programs between the work plan and the graphic view.
• Switches in the parameter screen between the help display and
the graphic view.
<CTRL> + <L>
Scrolls the actual user interface through all installed languages one
after the other.
<CTRL> + <SHIFT> + <L>
Scrolls the actual user interface through all installed languages in
the inverse sequence.
<CTRL> + <L>
Selects the maximum feedrate of 120% during the simulation.
Operating Manual, 01/2015, 6FC5398-6AP40-5BA2
Universal