Clock Speeds - HP H8/3003 User Manual

The H8/3003 emulator is provided without any QFP adaptors and PGA
adaptor(HP 64784E) with QFP probe. To emulate each processor with
your target system, you need to purchase appropriate QFP adaptor or
PGA adaptor with QFP probe listed in Table 1-1. To purchase them,
contact your local HP sales representative.
You can buy HP 64797B low voltage adaptor to emulate each
processor running with supply voltage from 2.7 up to 5.25V input in
your target system. To buy HP 64797B, contact your local HP sales
representative.
The list of supported microprocessors in Table 1-1 is not necessarily
complete. To determine if your microprocessor is supported or not,
contact Hewlett-Packard.

Clock Speeds

You can select whether the emulator will be clocked by the internal
clock source or by the external clock source on your target system.
When you select a clock input conforming to the specification of Table
1-2.
Refer to the "Configuration the Emulator" Chapter in this manual for
more details.
Introduction to the H8/3003 Emulator 1-5