Setting Up Drives - Siemens SINUMERIK 840D sl Operating Manual

Note
The USB interfaces of the NCU are not available for SINUMERIK Operate and can therefore
not be configured (with 840D sl).
14.12.2

Setting up drives

The "Set Up Drives" window is available in the "Start-up" operating area for configuring the
softkeys in the Program Manager.
Note
Reserved softkeys
Softkeys 4, 7 and 16 are not available to be freely configured.
File
The created configuration data is stored in the "logdrive.ini" file. This file is located in the /user/
sinumerik/hmi/cfg directory.
Milling
Operating Manual, 05/2017, A5E40868956
Software option - for 840D sl
In order to use the CompactFlash card as data carrier, you require the "Additional
HMI user memory on CF card of the NCU" option (not for SINUMERIK Operate on
PCU or PC).
Software option - for 828D
You will need the "Manage network drives" option to manage additional drives via
Ethernet.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Managing programs
14.12 Set up drives
705