Siemens SINUMERIK 840D sl Operating Manual page 57

Structure of the editor
Functions
Precondition
The control has been switched over to Korean.
Procedure
Editing characters using the keyboard
+
Milling
Operating Manual, 05/2017, A5E40868956
Editing characters using a matrix
Editing characters using the keyboard
Entering Korean characters
Entering Latin letters
1. Open the screen form and position the cursor on the input field.
Press the <Alt +S> keys.
The editor is displayed.
2. Switch to the "Keyboard - Matrix" selection box.
3. Select the keyboard.
4. Switch to the function selection box.
Introduction
2.4 User interface
57