Code Carrier Connection (Only 840D Sl) - Siemens SINUMERIK 840D sl Operating Manual

Hiding magazines
The magazine selection behavior with multiple magazines can be configured in different ways.
References
For a description of configuration options, refer to the
SINUMERIK Operate Commissioning Manual
13.5.8

Code carrier connection (only 840D sl)

You have the option of configuring a code carrier connection.
This means that the following functions are available in SINUMERIK Operate:
● Creating a new tool from code carrier
● Unloading tools on code carrier
References
Further details on tool management with code carrier and the configuration of the user interface
in SINUMERIK Operate can be found in the following reference:
● Function Manual SINUMERIK Integrate for Production AMB, AMC AMM/E
● SINUMERIK Operate Commissioning Manual
Milling
Operating Manual, 05/2017, A5E40868956
Deactivate the checkbox next to the magazines that you do not want to appear in the
magazine list.
Machine manufacturer
Please observe the information provided by the machine manufacturer.
Software option
In order to use the functions, you require the option "Tool Ident Connection".
Tool management
13.5 Tool list
647