Parameter
Description
ZR
Retraction path - only for incremental retraction in
(for ShopMill pro‐
gram)
Align tool through beta and gamma angles
β
Align tool with swivel axes
(for ShopMill pro‐
● Input value
gram)
● β = 0°
● β = 90°
γ
● 0°
(for ShopMill pro‐
● 180°
gram)
● The required angle can be freely entered
Directly position rotary axes
B1
Directly align the tool with the swiveling axes:
(for ShopMill pro‐
The required angle can be freely entered.
gram)
C1
The required angle can be freely entered.
(for ShopMill pro‐
gram)
αC
Rotational position for a pole position.
(for ShopMill pro‐
gram)
Hirth joint
● Round to the next Hirth joint
● Round up to Hirth joint
● Round down to Hirth joint
Note:
For machines with a Hirth joint
Tool
Tool tip when swiveling
● Tracking
● No tracking
Milling
Operating Manual, 05/2017, A5E40868956
The required angle can be freely entered.
The position of the tool tip is maintained during swiveling.
The position of the tool tip is not maintained during swiveling.
Programming technological functions (cycles)
10.5 Contour turning - Milling/turning machine
Unit
mm
Degrees
Degrees
Degrees
Degrees
Degrees
553