Ipv6 Pim-Ssm Configuration Example - HP MSR1002-4 Configuration Manual

IPv6 PIM-SSM configuration example

Network requirements
As shown in
•
OSPFv3 runs on the network.
•
The receivers receive VOD information through multicast. The receiver groups of different
organizations form stub networks, and one or more receiver hosts exist in each stub network.
The entire IPv6 PIM domain operates in the SSM mode.
•
Host A and Host C are IPv6 multicast receivers in two stub networks, N1 and N2.
•
The SSM group range is FF3E::/64.
•
MLDv2 runs between Router A and N1, and between Router B, Router C, and N2.
Figure 109 Network diagram
Source
4001::100/64
Table 29 Interface and IPv6 address assignment
Device
Router A
Router A
Router A
Router B
Router B
Router C
Router C
Figure 109:
GE1/0/1 GE1/0/4
GE1/0/3
Router D Router E
IPv6 PIM-SSM
Interface IPv6 address
GE1/0/1 1001::1/64
GE1/0/2 1002::1/64
GE1/0/3 1003::1/64
GE1/0/1 2001::1/64
GE1/0/2 2002::1/64
GE1/0/1 2001::2/64
GE1/0/2 3001::1/64
Router A
GE1/0/1
GE1/0/3
GE1/0/3
GE1/0/2
GE1/0/2
GE1/0/1
Router B
GE1/0/2
GE1/0/1
Router C
Device
Router D
Router D
Router D
Router E
Router E
Router E
Router E
380
Receiver
Host A
Host B
Receiver
GE1/0/1
Host C
Host D
Interface IPv6 address
GE1/0/1 4001::1/64
GE1/0/2 1002::2/64
GE1/0/3 4002::1/64
GE1/0/1 3001::2/64
GE1/0/2 2002::2/64
GE1/0/3 1003::2/64
GE1/0/4 4002::2/64