HP MSR1002-4 Configuration Manual page 378

[RouterA-pim6] static-rp 1002::2
[RouterA-pim6] quit
# Configure a static RP on Router B, Router C, and Router D in the same way Router A is
configured. (Details not shown.)
Verifying the configuration
# Display IPv6 PIM information on Router A.
[RouterA] display ipv6 pim interface
Interface
GE1/0/1
GE1/0/2
GE1/0/2
# Display BSR information on Router A.
[RouterA] display ipv6 pim bsr-info
Scope: non-scoped
State: Accept Preferred
Bootstrap timer: 00:01:44
Elected BSR address: 1003::2
Priority: 64
Hash mask length: 126
Uptime: 00:11:18
# Display BSR information on Router E.
[RouterE] display ipv6 pim bsr-info
Scope: non-scoped
State: Elected
Bootstrap timer: 00:01:44
Elected BSR address: 1003::2
Priority: 64
Hash mask length: 126
Uptime: 00:11:18
Candidate BSR address: 1003::2
Priority: 64
Hash mask length: 126
# Display RP information on Router A.
[RouterA] display ipv6 pim rp-info
BSR RP information:
Scope: non-scoped
Group/MaskLen: FF0E::101/64
RP address
1003::2
Static RP information:
RP address
1002::2
NbrCnt HelloInt DR-Pri
0 30 1
1 30 1
1 30 1
Priority
192
ACL Mode
---- pim-sm
369
DR-Address
FE80::A01:201:1
(local)
FE80::A01:201:2
FE80::A01:201:3
HoldTime Uptime
180 00:05:19
Preferred
No
Expires
00:02:11