Double solenoid
The following indicates the program which continuously outputs TRUE into the open output (OUT1) for open command and
TRUE into the close output (OUT2) for close command from outside when the control mode is AUTO.
Program example
(1)
(2)
(3)
(4)
(1) Open command (BOOL)
(2) Close command (BOOL)
(3) Open answer ( BOOL)
(4) Close answer (BOOL)
(5) Output (BOOL)
Open command: TRUE output continuously
(6) Close output (BOOL)
Close command: TRUE output continuously
For RS (Bistable function block (reset-dominant)), refer to the following.
MELSEC iQ-R Programming Manual (Instructions, Standard Functions/Function Blocks)
APPX
622
Appendix 4 Program Example
(5)
(6)