Single solenoid
The following indicates the program which continuously outputs TRUE for open command and FALSE for close command
when the control mode is AUTO.
Program example
(1)
(2)
(3)
(4)
(1) Open command (BOOL)
(2) Close command (BOOL)
(3) Open answer ( BOOL)
(4) Close answer (BOOL)
(5) Output (BOOL)
Open: TRUE, Close: FALSE
For RS (Bistable function block (reset-dominant)), refer to the following.
MELSEC iQ-R Programming Manual (Instructions, Standard Functions/Function Blocks)
(5)
APPX
Appendix 4 Program Example
A
621