Temperature; System Message; Power On/Off - Sony LSM-100 Operating Instructions Manual

Projectionist terminal
Hide thumbs Also See for LSM-100:
Table of Contents

Advertisement

Temperature

In addition to monitoring the status of cooling fans the
temperature of areas are also monitored. This is done
because while any fan may be running the airflow may also
be obstructed which could result in temperatures that
exceed operating limits.
To view the TEMPATURE STATUS
pane, from any Projectionist Terminal
display, tap the Temperature Status icon.
The TEMPERATURE STATUS pane
appears (illustrated below) and displays status indicators
for each of the following sub-systems.
• Enclosure
• Projector

System Message

During normal operation the Message
indicator, which appears at the far right of
the Status Indicator group, is not
illuminated and if pressed will appear as
depressed and the Projectionist Terminal reverts to the
SHOW INFORMATION screen.
During operation messages may be
generated in the Auditorium Unit that
require the attention of the projectionist.
When this occurs the Message indicator
will be illuminated as shown to the right. Tap the Message
indicator to display the message. Once the message has
been read tap OK to dismiss the popup.
20

Power ON/OFF

Power ON/OFF
Caution: In the R110 based Auditorium Unit, (Mains)
Power to the Projector comes directly from circuit
breakers located in the AC (MAINS) distribution panel.
Appropriate precautions should be taken when working in
and around the system as other power in the Auditorium
Unit may be present even though the AC (MAINS) circuit
breakers are set to OFF. In addition, power to critical
devices contained in the Auditorium Unit enclosure is
supported by an internal UPS and therefore may still be
present even when AC power (MAINS) is removed or
turned off at the distribution panel. The UPS insures that,
should a failure of the power mains occur, the various
devices are able to execute a controlled shutdown and
content remains secure.
AUDITORIUM UNIT - R110
Power ON/OFF
Projectionist Terminal
Once the mains power is applied to the Auditorium Unit its
Power ON sequence is initiated when you press YES on
Status Indicator Lamp

Advertisement

Table of Contents
loading

Table of Contents