Sony LSM-100 Operating Instructions Manual page 12

The appearance of the Show TITLE indicates its
current state as show in the following table.
TITLE Color
Orange
White
Grey
Below the list of Available Shows a status line
provides information about either the current show or
the Next Show.
An Available Show can be viewed on the auditorium
screen using the controls available here. To view
information about an Available Show, tap the
LEFT ARROW or RIGHT ARROW to scroll and
locate the specific Show. Tap the Show [TITLE]. The
selected Show appears in the Show Information group.
If the system is not being used for presentation of a
Show you can view an Available Show. This function
is provided essentially to allow quality assurance
viewing of content stored under Media Block control.
To view the selected Title on the auditorium screen,
locate and select the specific TITLE. If the selected
Title is available, i.e., valid Key(s), the PLAY/STOP
button becomes available
tap the PLAY/STOP button. The icon will indicate the
action that will be taken when tapped. Note: The
system should be in ON mode (lamp energized) for
approximately 10 minutes to obtain optimum
presentation quality.
• Show Details
To view information about each Content Element
comprising the selected SPL, tap Show Details. The
Show Details panel appears providing details related
to the Show, its presentation availability, and a graphic
representation of the individual Content Elements.
Show Information
Detail Level
Tap Content Element
for Element Details
The SHOW DETAILS pane contains three major
areas. They are: the Show Information, the Valid Use
1.If the Key(s) are not valid for the current date then
the PLAY/STOP button will not appear.
8
Media Block
SPL Status
Playing
Available for Presentation
One or more components not
available.
1
. To play the selected Title,
Close
Valid Use Dates
Details
Content Elements
Dates and, a scrollable sequence of Content Elements.
The information and functions available are the same
as found on the SHOW DETAILS screen under
SHOW SCHEDULE.
To view
additional
details for any
of the Content
Elements, tap
the specific
Content
Element and
either a
CONTENT DETAILS popup will appear (if the
element is a CPL) or another SHOW DETAILS screen
appears if the Content Element is a nested SPL.