Power over Ethernet injector (PoE power supply)
Further reading on the PoE power supply
For more information on the PoE power supply, refer to the following:
•
Power supply selection
power supply.
•
Ordering components
installations, including PoE power supply units, with Motorola part numbers.
•
Power supply unit specifications
supply (and the PIDU) such as dimensions, weight, environmental and electrical
requirements.
•
Connecting to the unit
management PC to allow configuration and alignment of the PTP 250.
•
Installing the PoE power supply
supply, connect it to the ODU, and prepare the network cables.
•
Connecting to the network
supply to the network when configuration, installation and alignment are complete.
•
Testing link end hardware
when testing the link end hardware for suspected faults.
1-12
on page
2-6
on page
2-24
on page
on page
6-3
describes how to connect the PoE power supply to a
on page
on page
on page
8-2
UNDER DEVELOPMENT
describes how to select a location for the PoE
lists the components required for PTP 250
4-3
contains specifications of the PoE power
5-29
describes how to install the PoE power
6-34
describes how to connect the PoE power
describes how the PoE power supply is used
phn-2182_003v004 (Oct 2011)
Chapter 1: Product description