Table 7-5 System Status Wireless Attributes - Motorola PTP 250 User Manual

PTP 250 User Guide

Table 7-5 System Status Wireless attributes

Attribute
Link Status
MAC Address
Channel Width
Current Channel
Extended Channel
Transmit Power
Receive Power
Vector Error
phn-2182_003v004 (Oct 2011)
Meaning
Current status of the wireless link. A state of 'Up' on a green
background indicates that a point-to-point link is established. Any
status on a yellow background indicates that the wireless link is
not established.
Whenever the Link Status is not 'Up', a yellow warning triangle is
displayed on the navigation bar. For more information, refer to
Managing link status and alerts
MAC address of the radio interface of this unit.
Width of the wireless channel, either 20 MHz or 40 MHz. This is
set in the Installation Wizard; see
on page 6-16.
The channel (MHz) in which this link operates. This is set in the
Installation Wizard; see
16.
The extended channel (MHz). This only applies when Channel
Width is 40 MHz.
The maximum, mean, minimum and latest measurements of
Transmit Power (dBm). See
page 7-23.
The maximum, mean, minimum and latest measurements of
Receive Power (dBm). See
page 7-23.
The maximum, mean, minimum and latest measurements of
Vector Error (dB). See
7-23.
The vector error measurement compares the In-phase /
Quadrature (IQ) modulation characteristics to an ideal signal to
determine the composite error vector magnitude.
Vector Error is expected to range from -2 dB (NLOS link
operating at sensitivity limit on BPSK 0.50) to –27 dB (short LOS
link running 64QAM 0.83). These are approximate values.
UNDER DEVELOPMENT
on page 7-15.
Step 2: Wireless configuration
Step 2: Wireless configuration
Diagnostics calculated over time
Diagnostics calculated over time
Diagnostics calculated over time
Web-based management
on page 6-
on
on
on page
7-11