Figure 5-6 Correct Cable Preparation For Drop Cable Of The Supported Type - Motorola PTP 250 User Manual

Installing the drop cable and LPU

Figure 5-6 Correct cable preparation for drop cable of the supported type

Check that the crimp tool matches the RJ45 connector being used; otherwise the cable or
connector may be damaged.
The cable inner sheath must be located correctly under the connector housing tang. If this
is not done correctly, there is no strain relief on the cable terminations.
Figure 5-7 shows the end of a drop cable fitted with an RJ45 plug and a gland.
5-18
UNDER DEVELOPMENT
Chapter 5: Installation
phn-2182_003v004 (Oct 2011)