Table of Contents
Advertisement
Installing connectorized antennas
7
Wrap a layer of 50 mm (2 inch) PVC tape from bottom to top, starting from
25 mm (1 inch) below the edge of the self-amalgamating tape, overlapping at half
width.
8
Repeat with a further four layers of 19 mm (0.75 inch) PVC tape, always
overlapping at half width. Wrap the layers in alternate directions:
Second layer: top to bottom.
Third layer: bottom to top.
Fourth layer: top to bottom.
Fifth layer: bottom to top.
The bottom edge of each layer should be 25 mm (1 inch) below the previous
layer.
9
Completed weatherproof connection:
5-14
UNDER DEVELOPMENT
Chapter 5: Installation
phn-2182_003v004 (Oct 2011)
Advertisement
Table of Contents
