Grinding with a B axis (only for cylindrical grinding machines)
10.3 Measuring in JOG
Procedure
Note
Angular alignment and cutting edge position
The "Beta" and "Machining opposite" fields must always be entered together.
Note
Selection of the swivel data set
If only one swivel data set is available, the "TC" selection box is omitted.
Please also refer to the machine manufacturer's instructions.
10.3
Measuring in JOG
10.3.1
Grinding wheel alignment for grinding
The tool measurement screens contain entry fields for aligning the grinding wheel or dresser.
242
1.
Select the "JOG" operating mode.
2.
Press the "T, S, M" softkey.
3.
Enter the name or the number of the tool T.
- OR -
Press the "Select tool" softkey to open the tool list, position the cursor on
the desired tool and press the "In manual" softkey.
The tool is transferred to the "T, S, M... window" and displayed in the field
of tool parameter "T".
4.
Enter the desired parameters.
5.
Press the <CYCLE START> key.
The tool is loaded into the spindle.
Operating Manual, 05/2017, A5E40869190
Grinding