5.2.2
Selecting a tool
Procedure
- OR -
5.2.3
Starting and stopping the spindle manually
Procedure
- OR -
Grinding
Operating Manual, 05/2017, A5E40869190
1.
Select the "JOG" operating mode.
2.
Press the "T, S, M" softkey.
3.
Enter the name or the number of the tool T.
- OR -
Press the "Select tool" softkey to open the tool list, position the cursor on
the desired tool and press the "In Manual" softkey.
The tool is transferred to the "T, S, M... window" and displayed in the field
of tool parameter "T".
4.
Select tool edge D or enter the number directly in field "D".
5.
Press the "CYCLE START" key.
The tool is loaded into the spindle.
1.
Select the "T,S,M" softkey in the "JOG" mode.
2.
Select the desired spindle (e.g. S1) and enter the desired spindle speed
or cutting speed in the right-hand entry field.
3.
If the machine has a gearbox for the spindle, set the gearing step.
Working in the manual mode
5.2 Selecting a tool and spindle
111