Figure 9-3
Figure 9-4
Resources
As resources, the cycle uses a block-wide synchronized action and a synchronized action
variable. The synchronized action is determined dynamically from the free area of the
synchronized action range (CUS.DIR - 1 ..., CMA.DIR - 1000 ..., CST.DIR – 1199 ...).
SYG_IS[1] is used as the synchronized action variable.
Examples
Example 1: Oscillation with two strokes:
Cycle parameters
● Infeed depth at the start: 0.02 mm
● Infeed depth at the end: 0.01 mm
Grinding
Operating Manual, 05/2017, A5E40869190
Cancellation of the infeed from the end to the start
Cancellation of the infeed from the start to the end
Programming technology functions
9.4 Oscillating cycles (CYCLE4071 ... CYCLE4079)
225