Siemens SINUMERIK 840D sl Operating Manual page 171

Note
Numbers from the number range 1 to 254 can only be assigned once, irrespective of the
identification number.
Display of synchronized actions
Using softkeys, you have the option of restricting the display to activated synchronized actions.
Procedure
...
Grinding
Operating Manual, 05/2017, A5E40869190
1. Select the "Machine" operating area.
2. Press the <AUTO>, <MDA> or <JOG> key.
3. Press the menu forward key and the "Synchron." softkey.
The "Synchronized Actions" window appears.
You obtain a display of all activated synchronized actions.
4. Press the "ID" softkey if you wish to hide the modal synchronized actions
in the automatic mode.
- AND / OR -
Press the "IDS" softkey if you wish to hide static synchronized actions.
- AND / OR -
Press the "Blockwise" softkey if you wish to hide the non-modal synchron‐
ized actions in the automatic mode.
5. Press the "ID", "IDS" or "Blockwise" softkeys to re-display the corre‐
sponding synchronized actions.
Machining the workpiece
6.15 Displaying status of synchronized actions
171