Editor Settings - Siemens SINUMERIK 840D sl Operating Manual

Machining the workpiece
6.10 Editing a program
6.10.7

Editor settings

Enter the default settings in the "Settings" window that are to take effect automatically when
the editor is opened.
Defaults
Setting
Number automatically
First block number
Increment
Display hidden lines
Display block end as
symbol
Line break
Line break also in cycle
calls
Visible programs
Width of the program
with focus
Save automatically
142
Meaning
● Yes: A new block number will automatically be assigned after every line
change. In this case, the specifications provided under "First block
number" and "Increment" are applicable.
● No: No automatic numbering
Specifies the starting block number of a newly created program.
The field is only visible when "Yes" is selected under "Number automatically".
Defines the increment used for the block numbers.
The field is only visible when "Yes" is selected under "Number automatically".
● Yes: Hidden lines marked with "*HD" (hidden) will be displayed.
● No: Lines marked with ";*HD*" will not be displayed.
Note:
Only visible program lines are taken into account with the "Search" and
"Search and Replace" functions.
The "LF" (line feed) symbol ¶ is displayed at the block end.
● Yes: Long lines are broken and wrapped around.
● No: If the program includes long lines, then a horizontal scrollbar is
displayed. You can move the section of the screen horizontally to the end
of the line.
● Yes: If the line of a cycle call becomes too long, then it is displayed over
several lines.
● No: The cycle call is truncated.
The field is only visible if "Yes" is entered under "Line break".
● 1 - 10
Select how many programs can be displayed next to one another in the
editor.
● Auto
Specifies that the number of programs entered in a job list or up to ten
selected programs will be displayed next to each other.
Here, you enter the width of the program that has the input focus in the editor
as a percentage of the window width.
● Yes: The changes are saved automatically when you change to another
operating area.
● No: You are prompted to save when changing to another operating area.
Save or reject the changes with the "Yes" and "No" softkeys.
Note: Only for local and external drives.
Operating Manual, 05/2017, A5E40869190
Grinding