Tool Data - Siemens SINUMERIK 840D sl Operating Manual

Manage tools
13.12 Tool details
Procedure
...
13.12.2

Tool data

The "Tool Details" window provides the following data on the selected tool when the "Tool
data" softkey is active.
Parameter
Magazine location
Tool name
ST
D quantity
D
Tool state
290
1. The tool list, the wear list, the OEM tool list or the magazine is open.
2. Position the cursor to the desired tool.
3. If you are in the tool list or in the magazine, press the ">>" and "Details"
softkey.
- OR -
If you are in the wear list or OEM tool list, press the "Details" softkey.
The "Tool Details" window is displayed.
The tool data is displayed in the list.
4. Press the "Grinding data" softkey if you want to display the grinding data.
5. Press the softkey "Cutting edge data" if you wish to display the cutting
edge data.
6. Press the softkey "Monitoring data" if you wish to display the monitoring
data.
Meaning
The magazine number is specified first, followed by the location number in the magazine.
If there is only one magazine, only the location number is displayed.
The tool is identified by the name and the sister tool number. You can enter the name as text or
number.
Sister tool number (for sister tool strategy)
Number of created cutting edges
Cutting edge number
A Activate tool
F Tool enabled
G Block tool
M Measure tool
V Reaching the prewarning limit
Operating Manual, 05/2017, A5E40869190
Grinding