Mitsubishi Electric Q26UD(E)HCPU User Manual page 524

Number Name Meaning
Status of
SD201 LED status
CPU-LED
Bit pattern of
LED off
SD202 LED that is
command
turned off
522
Explanation
• This register stores the LED status information on the CPU
module in the following bit pattern.
• 0 is off, 1 is on, and 2 is flashing.
to to
b15 b12b11 b8 b7
8) 7) 6) 5)
*1
1): RUN, 2): ERR., 3): USER , 4): BAT.
*1 *1 *1
Empty , 7): Empty , 8): MODE
*1 For the Basic model QCPU, 3) to 8) are left empty.
• This register stores the LED status information on the CPU
module in the following bit pattern.
• 0 is off, 1 is on, and 2 is flashing.
b15 to b12b11 to b8 b7
8) 7) 6) 5)
1): RUN, 2): ERR., 3): USER, 4): BAT., 5): BOOT
*2
CARD , 7): Empty, 8): MODE
*1 For the Q00UJCPU, Q00UCPU, and Q01UCPU, 5) is left
empty.
*2 For the CPU module other than the QnUDVCPU, 6) is left
empty.
• This register stores the LED status information on the CPU
module in the following bit pattern.
• 0 is off, 1 is on, and 2 is flashing.
b15 to b12b11 to b8 b7
8) 7) 6) 5)
1): RUN, 2): ERR., 3): USER, 4): BAT., 5): Empty, 6): Empty,
7): I/O ERR., 8): MODE
• By specifying the LEDs in this register and turning SM202
from off to on, the LEDs can be turned off. The USER and
*1
BOOT LEDs can be specified.
• The LED to be turned off can be specified in the following bit
pattern. (Setting "1" turns off the LED and setting "0" does
not turn off the LED.)
b15 b8 b4
Fixed to 0 Fixed to 0
*1 For the Q00UJCPU, Q00UCPU, and Q01UCPU, the
BOOT LED cannot be specified.
• By specifying the LEDs in this register and turning SM202
from off to on, the LEDs can be turned off. The USER LED
can be specified.
• The LED to be turned off can be specified in the following bit
pattern. (Setting "1" turns off the LED and setting "0" does
not turn off the LED.)
b15 b8 b4
Fixed to 0
Set by
(When Set)
to to
b4 b3 b0
4) 3) 2) 1)
*1 *1
, 5): BOOT , 6):
(0: Off, 1: Green, 2: Orange)
to b4 b3 to b0
S (Status
4) 3) 2) 1) change)
*1
, 6): SD
to b4 b3 to b0
4) 3) 2) 1)
b0
Fixed to 0
USER LED
BOOT LED
b0
Fixed to 0
USER LED
Corresponding
Corresponding
ACPU
D9
Q00J/Q00/Q01
QnPRH
New
QnPRH
U New
CPU
Qn(H)
QnPH
QnU
LCPU
Qn(H)
QnPH
QnU
LCPU