Optipoint 500 - Siemens HiPath 3000 Service Manual

Hide thumbs Also See for HiPath 3000:

Table of Contents

optiPoint 500

The optiPoint 500 telephones described in this section are compatible with the op-

tiset E telephones. It is possible to operate both telephone families on one U

board. You can also use telephones from the two families in mixed host-client con-

figurations (earlier called the master-slave or primary-secondary configuration).

You can find information on optiset E telephones, adapters, and add-on devices in

the Hicom 150 H V1.0/Hicom 150 E Office Rel.2.0-3.0 Service Manual (refer to

Section 1.6, "Information on the Intranet"): Electronic Documentation on Com ESY

Introduction

optiPoint 500 telephones handle the digital communication of voice and data (voice communi-

cation only for optiPoint 500 entry and optiPoint 500 economy). The three dialog keys and the

display guarantee convenient and interactive operation. Furthermore, the key lamp principle vi-

sualizes the activated functions.

With the exception of optiPoint 500 entry and optiPoint 500 economy, the optiPoint 500 tele-

phones have a USB 1.1 interface. This allows for PC-supported telephoning and Internet ac-

cess over the USB interface of a PC.

The optiPoint key module and optiPoint BLF add-on devices increase the number of function

keys available.

The different optiPoint 500 adapters allow flexible expansion of the telephone workstation. Ad-

ditional devices (such as personal computers, fax equipment, telephones, headsets) can be

connected quickly because it is easy to build them on to the bottom of the telephones (not

optiPoint 500 entry and optiPoint 500 economy) and because the adapters are plug "n" play".

You can find information not contained in this chapter in the optiPoint 500 Service Manual.

P31003-H3550-S403-4-7620, 02/05

HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual

Workpoint Clients

optiPoint 500

Table of Contents