Table of Contents
Advertisement
A-15
General Description
This feature allows a station user to hear a prearranged announcement when the station user dials a
predetermined access code.
Operating Procedure
To access:
1.
Lift the handset; receive Dial Tone.
2.
Dial the announcement trunk access code.
3.
Listen to the message from the announcement machine.
Service Conditions
1.
This feature requires one of the following hardware alternatives:
a.) Central Office Trunk (COT) or 2W E&M trunk (TLT) and an announcement machine.
b.) Digital Announcement Trunk (DAT).
2.
The following connections are available:
a.) multi connection: many station users or tie line trunks can connect to one announcement
trunk at the same time.
b.) single connection: at any given time, only one station/trunk can connect to one
announcement trunk.
3.
This feature is also available for tie line trunk access to announcement trunk.
4.
This connection can be continuous until a station user hangs up or it can be disconnected after
30-seconds. This function can be selected on a per announcement trunk basis.
5.
Before connection to the announcement machine is made, the system can be programmed to
send Ringback Tone.
6.
When this feature is activated from a tie line, an answer supervision signal will be sent to the far
end PBX.
7.
ANNOUNCEMENT SERVICE can be provided for a maximum of 127 trunks, which include the
announcement trunks for CALL FORWARDING - INTERCEPT/ANNOUNCEMENT [C-25].
8.
This feature is available from the Attendant Console. The Attendant dials the announcement
trunk access code and listens to a message from the announcement machine.
Interactions
1.
Each route connected to an announcement machine is also an EQP. The same route can be
assigned as different EQP's. However, it is best to separate EQP functions by route.
2.
8TLT, 16 COT, or 4DAT card may be used.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Announcement Service
Announcement Service
A-15
Page 19
Advertisement
Table of Contents
