Table of Contents
Advertisement
L-24
L-24
General Description
This feature allows Listed Directory Number Display on the ATTENDANT CONSOLE [A-3] when the
Attendant has answered a Listed Directory Number call.
Operating Procedure
The Attendant at an ATTENDANT CONSOLE [A-3] answers an incoming call (DID, TIE).
a.) The DEST lamp lights up.
b.) The Listed Directory Number is displayed.
The Attendant presses the "SRC" key.
a.) The DEST lamp goes out and the SRC lamp lights up.
b.) The route/trunk number is displayed.
Service Conditions
1.
This service is effective when the Attendant at an ATTENDANT CONSOLE [A-3] has answered
a Listed Directory Number call.
2.
If the Attendant presses the "SRC" key while the Listed Directory Number is displayed, the
display changes to the calling party's route/trunk number. In this case, the Listed Directory
Number of the call being handled at present cannot be displayed again.
3.
While the Listed Directory Number is displayed, the Attendant can transfer the call to a desired
station by entering the destination number on the key pad. In this case, the Listed Directory
Number of the call being handled at present cannot be displayed again.
4.
While the Listed Directory Number is displayed, the Attendant can place the present call on hold
by pressing the "HLD" key. In this case, the Listed Directory Number will not be displayed again
when the Attendant returns to the call on hold.
5.
While the Listed Directory Number is displayed, the Attendant can set CALL PARK [C-29]
service. In this case, the Listed Directory Number of the call placed on CALL PARK [C-29] cannot
be displayed again.
6.
The LISTED DIRECTORY NUMBER should be assigned in System Data.
Page 302
Listed Directory Number
Listed Directory Number
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Advertisement
Table of Contents
