I-1
General Description
This feature causes called stations to ring immediately upon establishment of connections.
Operating Procedure
No manual operation is required.
Service Conditions
1.
Ringing is applied to a called station as soon as the switch has determined that the station is idle.
There is no delay caused by waiting for a ring cycle.
2.
This feature applies to STATION-TO-STATION [S-11], Attendant (originated or completed),
Direct Inward Dialing (DID), and tie line calls.
3.
An idle station rings immediately after the last digit of the called station is dialed.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Immediate Ringing
Immediate Ringing
I-1
Page 267