Table of Contents
Advertisement
Interactions
1.
Night DIT service is NIGHT CONNECTION - FIXED [N-1]. The NIGHT CONNECTION - FIXED/
FLEXIBLE [N-1, 2] feature can be used to simulate a DIT application.
2.
When using NIGHT CONNECTION - FIXED/FLEXIBLE [N-1, 2], if the station is busy, the call will
divert to TRUNK ANSWER ANY STATION [T-8], if provided. If not provided, the call will queue
at the busy station until it becomes idle.
3.
The DIRECT-IN TERMINATION trunk is limited to the following types:
a.) DDD
b.) FX
c.) WATS
d.) CCSA
4.
All CALL FORWARDING [C-2, 3, 5] features may be used in conjunction with DIRECT-IN
TERMINATION. In the case of CALL FORWARDING - DON'T ANSWER [C-3], the call must
physically be ringing the DIT station. Call Forwarding is only available from a ground start DIT
trunk.
5.
STATION HUNTING [S-7, 8, 9] and UNIFORM CALL DISTRIBUTION (UCD) [U-1] may be used
with DIRECT-IN TERMINATION.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Direct-In Termination (DIT)
D-7
Page 199
Advertisement
Table of Contents
