Confirming Sntp Server Connection - Canon imageRUNNER 2545i System Settings Manual

Confirming SNTP Server Connection

Follow the procedure below to confirm if the TCP/IPv4 setting is properly set and
the time synchronization using SNTP is working correctly.
1
Press
Settings].
For help, see step 1 in "Setting SNTP Server Settings," on p. 3-13.
2
Press [TCP IP Settings].
For help, see step 2 in "Setting SNTP Server Settings," on p. 3-13.
3
Press [
Settings].
For help, see step 3 in "Setting SNTP Server Settings," on p. 3-13.
4
5
Press [OK].
6
Press
(Additional Functions) ➞ [System Settings] ➞ [Network
] until [SNTP Settings] appears ➞ press [SNTP
] or [
(Reset) to return to the top screen.
Press [NTP Server Check].
If <OK> is displayed, time synchronization
is working correctly via SNTP.
When <Error> is displayed, check if the
<NTP Server Address> setting is correct.
NOTE
Even if you perform [NTP Server
Check], the time settings will not be
updated. Check that communications
are possible between the machine and
the NTP server.
Setting SNTP
3
3-15