Canon imageRUNNER 2545i System Settings Manual page 210

NOTE
The [Security] tab is not displayed when:
• The drive to which the shared folder is set is formatted in FAT16 or FAT32.
• Simple file sharing is enabled.
7
Set the local-level access permission.
If the drive to which the shared folder is set is formatted in NTFS, you need to set the
local-level as well as the network-level access permissions.
❑
Click [Add...] to open the [Select Users or Groups] dialog box.
❑
Type [Computer Name]\[User Name] in [Enter the object names to select].
For Windows XP
❑
Click [Check Names]. Make sure that the correct object name is typed.
NOTE
If the object name is entered incorrectly, you see the [Name Not Found] dialog
box. If this happens, click [Cancel] to check whether or not the computer name
and user name are incorrect.
❑
Click [OK] to close the [Select Users or Groups] dialog box.
❑
In the [Security] sheet, under [Name], select the user whom you want to grant
permission. Select the [Full Control] box under [Allow].
NOTE
Select the [Full Control] box so that you can store data scanned with this
machine on a computer (the file server).
8
Click [OK] to close the [<Folder name> Properties] dialog box.
Setting File Server (File Sharing)
5
5-31