Specifying Communications Settings
This section describes the System Settings items related to the e-mail, I-fax, and
fax functions.
E-Mail/I-Fax Settings
You can change the e-mail and I-fax transmission settings listed below.
■ Maximum Data Size For Sending
4
Sets the maximum data size for outgoing e-mail messages and I-fax documents.
If the data size of the document sent from the machine exceeds the specified
maximum data size and <Divided TX over Max.Data Size> is set to 'On', the
document is split up into multiple files by page and sent as different e-mail or
I-fax messages.
■ Divided TX over Max.Data Size
Sets whether to divide a document into separate files when it is sent if its size
exceeds the data size you specify.
■ Default Subject
The subject that you enter here is used as the default subject whenever you do
not enter a subject when sending a job.
IMPORTANT
This setting is available only when the Send function (optional for the imageRUNNER
2545/2535/2530/2525/2520) is activated.
NOTE
The default settings are:
- Maximum TX Data Size:
- Divided TX over Max.Data Size: Off
- Default Subject:
4-2
Specifying Communications Settings
3 MB
Attached Image