When User Id Management Is Enabled - Canon imageRUNNER 2545i System Settings Manual

3
Press (Log In/Out).
The machine enters the System Management Mode.

When User ID Management Is Enabled

IMPORTANT
If User ID Management is enabled, only users registered as "System Manager" can
change the System Settings by logging in to the machine with their User ID and
password. In this case, you cannot log in as the System Manager by entering the
System Manager ID and System Password.
1
NOTE
For instructions on how to enter characters using the on-screen keyboard, see
Chapter 2, "Basic Operations," in the Reference Guide.
Enter the User ID and password.
❑
Press [User ID] ➞ enter the User ID of
the user registered as the System
Manager ➞ press [OK].
❑
Press [Password] ➞ enter the password
for the above user ➞ press [OK].
Setting System Management Mode
1
1-9