Canon imageRUNNER 2545i System Settings Manual page 225

7
NOTE
• <Total Print Lim> is the sum of <Copy Limit> and <Print Limit>.
• <B&W Scan Limit> is available only when the Send function (optional for the
imageRUNNER 2545/2535/2530/2525/2520) is activated or the optional Super G3 Fax
Board-AG1 is attached to the machine.
<Color Scan Limit> is available only when the Send function (optional for the
imageRUNNER 2545/2535/2530/2525/2520) is activated.
8
6
IMPORTANT
• The machine stops sending a fax if the Scan Limit is reached while faxing a document
either from memory or directly to the recipient.
• The machine stops scanning if the Scan Limit is reached while the machine is
scanning originals that are being fed from the feeder. (Those originals that were
scanned before the limit was reached are not added to the scan count.)
NOTE
• If you make a mistake when entering a number, press
number.
• You can set the page limit from 0 to 999,999 pages. Once the page limit is reached,
copying, scanning, or printing is not possible.
• The page limit refers to the number of printed surfaces. Therefore, a two-sided print is
counted as two pages.
6-6
Setting Department ID Management
Press [On] under the desired
function(s).
If you do not want to set a page limit
restriction for the function, press [Off].
Press [ ] (Page Limit) next to
[On]/[Off] of the desired
function(s) ➞ enter the page limit
restriction using
keys).
(Clear) ➞ enter the correct
- (numeric