LAN cables must be connected to both the active and
standby management modules to enable continuous
connection to the management interfaces at failover.
Link Fault Tolerance (LFT)
When the management module is configured redundantly, you can also build
redundancy into the management network. This functionality is known as Link Fault
Tolerance (LFT). An overview of LFT is shown in the following figure.
BladeSmyphony 2000 Cha ssi s
Server blade
Management module :
active
MGMT0
Failure
LANSW
3. Communication is recovered via a path between the standby L2SW and the acti ve L2SW.
×8 blades
1. Detects linkdown in the
associated LANSW, and
closes ports on the active
management module.
L2SW
LANSW
1509
Switch module
2. Opens ports on the standby
management module.
Management module :
standby
L2SW
MGMT0
LANSW
×6 switches