Fastaddress, Bosch Protocol - Bosch MIC612 Operation Manual

36 en | Getting Started
Figure 7.1: MIC612 Connection Configuration
7.6

FastAddress, Bosch Protocol

In Bosch protocol, there are three (3) FastAddress commands:
–
Notice!
If a keyboard is set to a camera number that already has an address, that camera also
responds to this command.
–
–
2016.03 | 2.1 | F.01U.249.416
1 Viewing window of optical camera
2 Viewing window of thermal camera
3 Connection from optical camera to
matrix switcher
4 Switchable connection (via Aux
commands) from optical camera or
thermal camera to matrix switcher
ON-999-ENTER: Displays and programs all cameras without an address in the system.
ON-998-ENTER: Displays and programs all cameras with or without an address in the
system.
ON-997-ENTER: Displays the current address status of all cameras in the system
simultaneously.
5 Matrix switcher
6 Monitor
7 Keyboard
Operation Manual
MIC612 Thermal Camera
Bosch Security Systems