MIC612 Thermal Camera
9
On-Screen Display (OSD) Menus (Pelco Protocol)
This chapter identifies and describes each OSD menu option, as well as the default setting for
each option, for Pelco protocol. For step-by-step instructions, see Common User Commands,
page 73 and Advanced Features, page 75.
To open the main Setup Menu in Pelco protocol: Press 95-PRESET for approximately 2
seconds. The screen Setup Menu appears.
Setup Menu
Exit...
Command Lock:
Bosch Menu
Camera Setup
PTZ Setup
Edit Password
*FastAddress:
Advanced
Software Version
Ack and Reset Alarms
Restore All Settings
Reset All Memory
* = Factory Setting
Focus / Iris: Select
Bosch Security Systems
On-Screen Display (OSD) Menus (Pelco Protocol) | en
OFF
Not Set
Operation Manual
63
2016.03 | 2.1 | F.01U.249.416