Switching Regulator Unit (Ps) - Toshiba e-STUDIO182 Service Manual

2.6.5

Switching regulator unit (PS)

(1) Take off the left cover.
P.2-18 "2.5.3 Left cover"
(2) Disconnect 15 connectors.
Note:
The number of connectors to be
disconnected is 15 when the following
options are installed.
A: Paper Feed Controller (GH-1060)
B: Fax Kit (GD-1220/1221)
Note:
Connect the connectors to the correct faston
terminals on the switching regulator board.
Connector
F. Red -
E. Blue -
D. White -
C. White -
B. White -
A. White -
(3) Remove 2 screws, slide the switching
regulator unit with the whole case slightly to
the front, and then lift it up to take it off.
© 2009 TOSHIBA TEC CORPORATION All rights reserved
A
B
Harness
Black-thick
White-thick
Black-thin
Red-thin
Red-thick
White-thick
Switching regulator unit
2 - 25
Fig. 2-30
F
E
D
C
B
A
Fig. 2-31
Fig. 2-32
e-STUDIO182/212/242
OUTLINE OF THE MACHINE
2