Main Motor Drive Unit - Toshiba e-STUDIO182 Service Manual

8.5.3

Main motor drive unit

(1) Take off the Process unit.
P.10-9 "10.7.1 Process unit"
(2) Take off the toner motor with the bracket.
(3) Remove 2 screws and take off the
registration roller holder.
Note:
When installing the registration roller holder,
align the arm of the registration clutch with
the rotation stopper of the registration roller
holder.
(4) Remove 1 clip and take off 1 bushing.
(5) Disconnect 1 connector, remove 3 screws
and take off the main motor drive unit.
© 2009 TOSHIBA TEC CORPORATION All rights reserved
Registration roller holder
Rotation stopper
Fig. 8-6
Clip Bushing
Fig. 8-7
Main motor drive unit
Fig. 8-8
8 - 7
Connector
e-STUDIO182/212/242
DRIVE UNIT
8