Time And Date; Toll Restriction - NEC DS1000 Product Description

The system's 32 Conference circuits are dynamically allocated as users request them.
Feature Quick Steps
To set up a tandem call (Unsupervised Conference):
1.
2.
To disconnect a tandem call (using Forced Trunk Disconnect):
1.
To Barge In on a tandem call:
1.

Time and Date

The system administrator can change the time and date from the system programming mode.
Although the data is entered in 24-hour format, it always displays in 12-hour format (e.g., 1300 =
1:00PM).
User Programmable Feature: # T D

Toll Restriction

tion Level. For each of the 7 Toll Restriction Levels, the administrator can enable or disable the fol-
lowing options.
DS1000/2000 Product Description
Establish trunk call + Press CONF .
Place or answer trunk call + press CONF to set up the Conference + Hang up.
Press line key for busy trunk. or Press ICM and dial the trunk's Direct Trunk Access code
(e.g., 401 for trunk 1) + Dial # to disconnect the line.
Press line key for busy trunk, or press ICM and dial the trunk's Direct Trunk Access code (e.g.,
401 for trunk 1) + Dial 4.
The time and date shows on
telephone displays and
prints on system reports.
Sets the system time and date.
Use Toll Restriction to help
you control the costs of
outgoing long distance calls.
Active Dial Pad (Continuous Dialing)
Active Dial Pad continuously enables the telephone dial pad. This is important if co-workers
typically use dial-up services (such as automated banking) or frequently dial into Voice Mail
systems. With Active Dial Pad disabled, the system disables the telephone dial pad 6 seconds
after the user has dialed their last digit. Toll Restriction controls Active Dial Pad for both
incoming and outgoing calls.
Section 3: Features
Availability: All versions.
• DS2000 U Slot (02.nn.nn) and DS1000 add User Program-
mable Feature Steps.
The system Time and Date appears on:
Display Telephones
Station Message Detail Recording reports
Availability: All versions.
Toll Restriction limits the numbers an extension user may dial.
By allowing extensions to place only certain types of calls, the
system administrator can control long distance costs. The system
applies Toll Restriction according to an extension's Toll Restric-
Section 3: Features
3
91