Reverse Voice Over - NEC DS1000 Product Description

Reverse Voice Over

initial caller cannot hear the Reverse Voice Over conversation. The private Intercom call continues
until the Reverse Voice Over caller releases the key. The initial handset call can be a trunk call or an
Intercom call. An extension can have Reverse Voice Over keys for more than one co-worker.
Reverse Voice Over could help a salesperson, for example, when placing a call to an important cli-
ent. The salesperson can talk with the client and give special instructions to an assistant — without
interrupting the initial call.
When the keyset is idle, the Reverse Voice Over key functions the same as a Hotline key. (You cannot,
however, use it to Transfer calls.) The key also shows at a glance the status of the associated extension:
Reverse Voice Over uses a system Conference circuit while it is active. The following table shows
the system's Conference capacities:
The system's 32 Conference circuits are dynamically allocated as users request them.
Feature Quick Steps
To place a Reverse Voice Over call:
1.
To return to your initial caller:
1.
DS1000/2000 Product Description
Privately call a co-worker
while you're busy on your
handset.
Reverse Voice Over Busy Lamp Indications
When the key is:
Off
On
Flashing fast
Description
Conference circuits
Maximum simultaneous users in Conference
(total of all Conferences system-wide)
Maximum simultaneous conferences
Maximum parties in any one Conference
(trunks and/or extensions)
While on a handset call, press and hold your Reverse Voice Over key.
Release your Reverse Voice Over key.
Section 3: Features
Availability: All versions.
While on a handset call, Reverse Voice Over lets a busy keyset
user make a private Intercom call to an idle co-worker. The busy
user just presses and holds down a programmed Reverse Voice
Over key to make a private call to the assigned co-worker. The
The covered extension is:
Idle or not installed
Busy or ringing
In Do Not Disturb
Capacity
32
32
8
8
Section 3: Features
3
75