NEC DS1000 Product Description page 133

Station Message Detail
Recording
Station Timers
System Programming
Backup and Restore
System Programming
Password Protection
System Timers
Switched Loop Keys
System Hold
System Speed Dial
Tandem Trunking /
Unsupervised Conference
DS1000/2000 Product Description
A system report, typically printed on a printer connected to the system's
RS-232-C serial port, that provides a record of the system's outside
(trunk) calls.
Station Message Detail Recording on page 83.
Reference:
See System Timers on page 125 in this glossary.
The capability of the DS2000 system to allows site-specific customer
data to be saved to and restored from PC Card P/N 85880.
System Programming Backup and Restore on page 84.
Reference:
The protection the system provides against unauthorized programming
by requiring the system programmer to enter a password prior to chang-
ing system options.
Reference: System Programming Password Protection on page 84.
The system provides numerous timers that control aspects of system, sta-
tion, and outside line (trunk) behavior.
System Timers on page 85.
Reference:
See Loop Keys on page 120 in this glossary.
A type of Hold for outside (trunk) calls that allows any extension user to
retrieve the call from Hold. See also Automatic Hold on page 112, Exclu-
sive Hold on page 116, and Intercom Hold on page 119 in this glossary.
Hold on page 54.
Reference:
See Speed Dial on page 124 in this glossary.
A type of Conference that lets an extension user join two outside callers
in a trunk-to-trunk Conference, drop out of the call, and leave the 2 trunk
callers connected.
Tandem Trunking / Unsupervised Conference on page 90.
Reference:
Glossary
Section 5: Glossary
5
125