Automatic Hold; Intercom Hold; Hotline - NEC DS1000 Product Description

Automatic Hold

Automatic Hold allows a user to be on a trunk call, activate a feature and automatically place the
call on Hold without first pressing the HOLD key. The system places a call on Hold automatically
when the user presses CONF or ICM, a Call Coverage Key or a Hotline key.

Intercom Hold

A user can place an Intercom call on Hold. The Intercom call on Hold does not indicate at any other
extension.
Feature Quick Steps
To place a trunk call on System Hold:
1.
To place a trunk call on Exclusive Hold:
1.
To pick up a trunk call on Hold:
1.
To pick up a trunk on Hold at another extension:
1.
To place an Intercom call on Hold:
1.
To pick up a call on Intercom Hold:
1.

Hotline

button calling and Transfer to another extension (the Hotline partner). Hotline helps co-workers that
work closely together. The Hotline partners can call or Transfer calls to each other just by pressing
their Hotline key. In addition, the Hotline key shows the status of the partner's extension:
For an alternate feature that also provides one-button Intercom access and Transfer, turn to Direct
Station Selection (DSS) on page 41.
DS1000/2000 Product Description
Press HOLD + Hang up.
Press HOLD twice + Hang up.
Press flashing line key.
Press ICM + Dial *4 followed by the trunk number (e.g., 01 for trunk 1).
Press HOLD + Hang up.
Lift handset + Press HOLD .
Hotline provides partner
extensions with one-button
calling and Transfer.
When the key is:
Off
On
Flashing fast
Section 3: Features
Availability: All versions.
• DS2000 U Slot (02.nn.nn) and DS1000 add User Program-
mable Feature Steps.
Hotline gives a keyset user with a programmed Hotline key one-
Hotline Busy Lamp Indications
The covered extension is:
Idle or not installed
In Do Not Disturb
Busy or ringing
Section 3: Features
3
55